40mm height density 6.5 band PTFE disc Piston without any defect after durability test Specifications: high shock absorber piston new design with PTFE banded on OD we can produce according to the customer's ... Read More
32mm inclined holes Damper Piston with good tensile strength for car shock absorber Specifications: Material: MPIF FC-0205 density: No less than 6.8g/cm3 Hardness: 60-100 HB Steam treatment: 2H high temp steam ... Read More
32mm Fe C Cu sinter shock absorber piston with concentricity 0.05 for rear shocks Specifications: Product Name Shock absorber piston Material (MPIF 35) FC-0205 (DIN 30910-4) Sint C10, Fe, Balance, Cu 1.5-3.9%, ... Read More
Automatic production line for 36mm Shock Absorber Piston with banding hardness 59 HRB Pistons can be done for blow off test to check the PTFE bands is firmly enough. Lateral load demand for different piston ... Read More
Tensile strength 18MPa PTFE with carbon fiber banded piston of good seal Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness ... Read More
Hoganas powder produced PTFE Shock Piston with low mass wearing quantity Specifications: Here is the physical properties of our products Tensile strength 23N/mm2 Carrying capacity 15N/mm3 Working temperature ... Read More
single lip design filled PTFE bands piston with tolerance 0.05mm for truck rear shocks Size: 30mm or according to drawings Material for sinter piston: FC-0208 Fillers for banding material: Carbon fiber Design: ... Read More
New generation of blow - off testing machine for PTFE banded piston applied in shocks Purpose of this test: to determine the friction for PTFE banded piston when adding different weights. The test is performed ... Read More
high temperature resist and no oil leak shock pistons of different fillers Specifications: Physical performance for shock pistons tensile strength More than 15MPa elongation @ break More than 200% shore ... Read More
density 6.5g Antioxidant treatment FC-0208 shock absorber piston for front shocks Specifications: Physical performance for shock piston tensile strength More than 18MPa elongation @ break More than 160% shore ... Read More