"automatic banding machine"

single lip design filled PTFE bands piston with tolerance 0.05mm for truck rear shocks Size: 30mm or according to drawings Material for sinter piston: FC-0208 Fillers for banding material: Carbon fiber Design: Flared OD Hardness for banding material: 57 HRB Specifications: TEST METHOD RESULT Tensile strength ASTM 4894 20N/mm2 Minimum Elongation at Break ASTM 4894 170% Density ASTM 4894 2.16gr/cm3 Shore D Hardness ASTM 4894 60 Various testing machine Density balance Shore

Concentricity 0.02 PTFE banded piston rings can stand professional fatigue test Specifications: Various testing machine Density balance Shore hardness Projector Drawing force testing machine Fatigue testing machine Abrasion testing machine Tensile testing machine Oil immersion testing machine Friction testing machine Description: XIAYI company mainly produce different kinds of shock absorber pistons, dimensions from 20MM50MM,can be used in motorcycles or cars' shock

unique fluid channels for banded pistons 30mm diameter with conform size Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness 57 - 61 density 2.06 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3 highest working temperature 260 Description: XIAYI produce different size of shock absorber pistons. These pistons can be used in different car or motorcycle shock absorbers. Sinter

sinter shock absorber piston without PTFE fall off after fatigue test of 1,000,000 cycles Specifications: front shock absorber piston conventional design with PTFE banded on OD we can produce according to the customer's drawing middle part(sinter part), we can use the material as the customer's demand carbon content is 0.1%, copper content is 3% or other choice Here is the physical properties of our products Tensile strength 18N/mm2 Carrying capacity 15N/mm3

Fe C Cu based sinter shock piston with plastic hardness 60 for car front shocks OD after banding: 26.95-27.00mm banding height: 9.75-10.25mm ID for sinter piston: 7.20-7.23mm Specifications: Here is the physical properties of our products Tensile strength 18N/mm2 Carrying capacity 15N/mm3 Working temperature -80C to 260C Friction coefficient(dry) 0.16 Friction coefficient(oil) 0.05 Physical performance for shock piston tensile strength More than 18MPa elongation @

30mm PTFE banded Shock Piston with PTFE fillers banding Used in Car shocks Specifications: 4 round and square holes conventional shock piston net weight is 35.29g we can do drawing load test for banded piston without band slippage after test. Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness 57 - 61 density 2.15 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3 highest working

High Performance Fe C Cu Shock Absorber Piston With Low Friction And Good Wear For Cars In order to ensure the quality of our products, our company has established a quality assurance system of "management, technology and service". Adopting international advanced testing technology, strict quality control, starting from raw materials, including design, process, manufacturing to after-sales service for the whole process control, quality control system for finished product

PTFE banding D27 Shock Absorber Piston with good seal and low friction for shocks Specifications: Various testing machine Density balance Shore hardness Projector Drawing force testing machine Fatigue testing machine Abrasion testing machine Tensile testing machine Oil immersion testing machine Friction testing machine Description: PTFE banding D27 Shock Absorber Piston with good seal and low friction for various automotive Our company produces shock absorber pistons with

Inclined Hole Design Shock Absorber Piston Banding Material Shore Hardness 57-67 Four pairs of inclined hole design shock absorber piston Steam treatment for the sinter parts Banding process operated on the automatic banding machine Banding machine is designed and manufactured by XIAYI company XIAYI has finished many sets of machine and machine are sold to some big powder metallurgy factories. Together with machine,we can also supply PTFE ring discs with qualtiy guarantee.