30mm PTFE Banded Front Shock Absorber Piston With Elongation @ Break 200% Min Specifications: many round oil holes design conventional shock piston net weight is 30.3g we can do drawing load test for banded ... Read More
Low friction and good seal special design 35# automotive Shock Absorber Piston Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore ... Read More
35# PTFE shock piston with HRB75, density 6.5g/cm3 used in car shock absorbers Groovefill requirement for banded piston The minimum groovefill requirement is valid for the average measurement / groove on both ... Read More
Lateral load 4.6 - 5.6 KN blow - off testing machine for testing PTFE shock pistons Purpose of this test: to determine the friction for PTFE banded piston when adding different weights. The test is performed ... Read More
Tensile Strength 18mpa Flared Banded Piston Used In Suspension From Heavy Truck Specifications: Various testing machine Density balance Shore hardness Projector Drawing force testing machine Fatigue testing ... Read More
Different Filler PTFE Bands With Good Seal And Tensile Strength For Sinter Pistons Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa 15.0 Ultimate elongation(min) ... Read More
FC - 0208 wide groove sinter metal piston banded PTFE bands in car shocks Specifications: Material P/M Copper and Copper Alloys P/M Iron and Carbon Steel Iron And Carbon Steel Iron-Copper And Copper Steel ... Read More
Automatic transport belt skirting machine produce shock pistons with size consistency Can produce all the pistons in the following sheet 25 24.98*25.17*9.8 27 26.95*27.25*9.5 24.88*25*10.5 26.92*27.02*9.5 24.95... Read More
Elongation @ Break 200% OEM PTFE Banded Piston Applied In Car Front Shock Absorber A shock absorber includes a cylinder, a piston, a piston rod and other components. The production cost of shock absorber piston ... Read More
Elongation @ break 356% Banded Piston of shock absorber OD 30mm With leakage Oil Holes Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% ... Read More