"ptfe band"

OEM Slope Low Friction Force Shock Piston PTFE Band On OD Applied In Truck Shocks Poly Fluoro Piston Bands are designed for hydraulic and pneumatic equipment. Its unique design prevents equipment seizures which can arise with other forms of guidance materials. Poly Fluoro Piston Bands offer extremely low friction and break-away forces. This material is also resistant to all hydraulic fluids, and is suitable for temperatures up to 200C. Poly Fluoro Piston bands are the

Elongation @ Break 200% OEM PTFE Banded Piston Applied In Car Front Shock Absorber A shock absorber includes a cylinder, a piston, a piston rod and other components. The production cost of shock absorber piston using PTFE and filled with modified material could decrease by 20%, attain the desired results of filling the modified material and greatly improve the service performance of the piston. Material to be used for motorcycle and automotive shock absorber piston ring

Density 2.19 Uniform Distribution Filled PTFE Ring Gasket Used To Band Sinter Piston Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa 15.0 Ultimate elongation(min) % 150 Working Temp. -180~260 Melting point 327 Produce Max Temp. 385 Size mm 20mm~400mm Material Name Main Properties Notes Temperature Range PTFE General Purpose ; Unfilled PTFE with Food grade-conformance Food contact compliant -180C to 260C Modified PTFE

Elongation @ break 200 % PTFE Banded Piston Used In car shocks with good seal Specifications: Various testing machine Density balance Shore hardness Projector Drawing force testing machine Fatigue testing machine Abrasion testing machine Tensile testing machine Oil immersion testing machine Friction testing machine Description: Pass blow-off testing filled PTFE banded Shock Absorber Piston, XIA YI makes great efforts to research and develop the filling material for small

Can stand fatigue test and no burr PTFE banded piston Used in Auto Shocks Specifications: Here is the physical properties of our products Tensile strength 23N/mm2 Carrying capacity 15N/mm3 Working temperature -80C to 260C Friction coefficient(dry) 0.16 Friction coefficient(oil) 0.05 Description: Aging resistance and no-sticky powder metallurgy PTFE banding piston D32 auto Shock Absorber Piston Xia Yi mainly produces shock absorber pistons with many different dimensions

Heat pressing Flared PTFE Banded Piston With Tensile Strength 18.5MPa For Car Shocks SPEC: D31.5XD8.5X13 Six holes design Ring disc size D30*D16X0.60 Symmetrical distribution Surface roughness Ra

high temp resist PTFE ring gasket with density 2.15 used to band PTFE on pistons Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa 15.0 Ultimate elongation(min) % 150 Working Temp. -180~260 Melting point 327 Produce Max Temp. 385 Size mm 20mm~400mm 1. Good sealing effect in Dynamic and static sealing 2. Minimal start-up and movement friction, smooth movement even at low speeds, no creeping phenomenon. 3. Good abrasion. 4

45mm PTFE banded Shock absorber Piston with friction coefficient 0.18 for rear shocks Specifications: many round oil holes design conventional shock piston net weight is 45.29g we can do drawing load test for banded piston without band slippage after test. Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness 57 - 61 density 2.15 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3

Lip design 27mm PTFE Banded Shock Absorber Piston applied in automotive Shocks Pistons can pass blow-off testing, without any material fall off. Banding material can be accepted by customer's requirement. 3-4 automatic production line can satisfy large quantity from buyers. Can supply piston togerther with dimension report and material report. If any quality problems, we will reply and take action within 12 hours. Specifications: 4 round and square holes conventional