"ptfe band"

PTFE plus fillers resist high temperature PTFE ring gaslet for banding shock piston Specifications: Material pure PTFE Color White High and low temperature resistance -200 - 260C Processing Machine by mold Dynamic friction coefficient 0.2-0.3 1. Low water absorption 2. Corrosion resistance 3. Temperature resistance 4. High diaphaneity 5. Voltage resistance Description: 1. Good tensile strength 2. High insulation 3. Best corrosion-resistant 4. Low friction 5. Abrasion

Product Description: One of the key features of the Banded Piston is its size, which can be customized according to the specific requirements of the application. This ensures a perfect fit and optimal performance, allowing for a smoother and more comfortable ride. Another important attribute of the Banded Piston is its high level of corrosion resistance. This is due to the fact that it is made from Fe-C-Cu, a material that is known for its excellent corrosion resistance

New Design PTFE Banded With No Burrs Shock Absorber Piston Of Shore D Hardness 60 Specifications: multihole design can do slide resistance test according to the customer's demand piston should slide down uniformity both in positive and contrary direction, no damping stagnation test velocity is 3mm/min, Static strength damage:11.27KN Physical performance for shock piston tensile strength More than 18MPa elongation @ break More than 160% shore hardness 57 - 62 density 2

Skew oil holes and low friction Banded piston for shocks from secondary market Specifications: band PTFE discs on outer diameter surface hardness of sinter piston : HRB65-85 radial crushing strength of sinter piston > 8000N Physical performance for shock pistons tensile strength More than 15MPa elongation @ break More than 200% shore hardness (bands) 57 - 61 density 2.15 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3 hardness (sinter piston) HRB65-85

Automatic friction and blow - off testing machine for testing PTFE banding piston Purpose of this test: to determine the friction for PTFE banded piston when adding different weights. The test is performed with a constant lateral force applied to the piston during the pressure build up over the piston. Automatically get the average friction after testing five cycles. Test method: 1. Put the testing tube into shock absorber oil to assure the oil in the ID of the tube. 2. Fix

Automatic blow - off testing machine drawing force testing for PTFE banded piston Purpose of this test: to determine the friction for PTFE banded piston when adding different weights. The test is performed with a constant lateral force applied to the piston during the pressure build up over the piston. Automatically get the average friction after testing five cycles. Test method: 1. Put the testing tube into shock absorber oil to assure the oil in the ID of the tube. 2. Fix

FC - 0208 wide groove sinter metal piston banded PTFE bands in car shocks Specifications: Material P/M Copper and Copper Alloys P/M Iron and Carbon Steel Iron And Carbon Steel Iron-Copper And Copper Steel Sinter Hardened Steel Commix Low Alloy Steel Surface treatment Sand Blasting Zinc/Chrome Plating Rust-preventive treatment (steaming treating) Painting Electrophoresis Powder Coating Description: Shock absorber piston Conventional design With PTFE banded on OD We can

20MPa tensile strength Shock Absorber Piston with skirting PTFE for truck shocks Specifications: Physical performance for shock piston tensile strength More than 18MPa elongation @ break More than 160% shore hardness (bands) 57 - 61 density 2.06 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.2 hardness (sinter piston) HRB60-80 Technical requirements for sinter piston Raw material F50 - U3 - 66 or FC - 0208 Steam treatment OD tested by digital air gauge

Automatic Banding Machine To Produce Banded Piston With Faces Identification Function This is the newest generation of automatic banding machine with the function of different faces indentification and height cutting. We can replace spare parts such as PLC, air cylinder and other parts according to the customer's demand, some customers need the brand of Mitsubishi or need imported PLC, we can all satisfy their demand. So we can design and produce this machine by OEM. This