"shock absorber machine"

120mm shock absorber spring seat bracket parts with material SPHC for car shocks Item Description Part Name Stamping Part Material SAE1010,SAE1020,SPHC,ST12, Stainless steel, Carbon steel,Copper, Brass, Bronze (According to customer's requirements) Thickness 0.5mm~10mm, or other special available Surface Treatment Hot galvanized, Polishing, Zinc-plated, Nickel-plated, Silver-plated, Gold-plated, Imitation gold-plated, Powder coating (According to customer's requirements)

Filled PTFE Banded Shock Absorber Piston With Low Friction Applied in Cars Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness 57 - 61 density 2.15 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3 highest working temperature 260 Description: glass fiber and Molybdenum disulphide filled PTFE banded shock pistons with low friction and low creep physical properties: percent

Automotive Suspension Fe-C-Cu Powder Based Sintered Rod Guide For Shock Absorbers Specifications: Material P/M Copper and Copper Alloys P/M Iron and Carbon Steel Iron And Carbon Steel Iron-Copper And Copper Steel Sinter Hardened Steel Commix Low Alloy Steel Surface treatment Sand Blasting Zinc/Chrome Plating Rust-preventive treatment (steaming treating) Painting Electrophoresis Powder Coating Description: XIAYI produces different kinds of powder metallurgy products. These

35# PTFE shock piston with HRB75, density 6.5g/cm3 used in car shock absorbers Groovefill requirement for banded piston The minimum groovefill requirement is valid for the average measurement / groove on both sides of the piston (0

25mm PTFE banded shock piston with HRB70 - 90, density > 6.5g/cm3 with ID 7.1mm Piston export to Europe market with good quality pistons are produced by automatic banding machine 100% tested by air gauge with consistent size and coaxiality Groovefill requirement for banded piston The minimum groovefill requirement is valid for the average measurement / groove on both sides of the piston (0 and 180 on the circumference of the piston) BORE SIZE GROOVE FILL 27 MM MIN 0,24 MM

OD 46mm PTFE banded Shock Absorber Piston 15MPa tensile strength structual parts Specifications: with PTFE banded on OD we can produce according to the customer's drawing middle part(sinter part), we can use the material as the customer's demand Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness (bands) 57 - 61 density 2.15 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3 hardness

Lead Free Bushing Lined In Shock Absorber Repair Rod Guider Steam Treatment Specifications: Type Powder metallurgy rod guide Material Fe-C-Cu or alloy Model Number OEM/ODM Certification TS16949 Process powder metallurgy Precision Rating high size as customer drawing Surface heat treatment or steam treatment Quality control Professional precision manufacture for more than 10 years. 1.Quality control:The defective products rate is 0.1%. Imported material 100%. 2.Reasonable

Small Groove Heavy Duty Shock Absorber Sinter Piston with steam treatment Our company produce different kinds of powder metallurgy products.These powder metallurgy products can be used in different areas such as auto accessories, power tool, mechanical parts, home appliances, office equipment, spinning machine and other machines. Specifications: Certification DIN, ISO 9001:2008 Type non standard Process Powder metallurgy Cooperation Mode OEM or ODM Typical Tolerance 0.05mm

Popular with good performance Rod Guider Shock Absorber Reconditioning Material Available and Chemical Composition: P/M Copper and Copper Alloys P/M Iron and Carbon Steel Iron And Carbon Steel Iron-Copper And Copper Steel Iron-Nickel And Nickel Steel Low Alloy Steel Commix Low Alloy Steel Sinter Hardened Steel Diffusion Alloyed Steel Copper Infiltrated Iron And steel Specifications: Material P/M Copper and Copper Alloys P/M Iron and Carbon Steel Iron And Carbon Steel Iron