Shock Absorber Piston
Filled PTFE Banded Low Friction Shock Absorber Piston Applied In Cars
Filled PTFE Banded Shock Absorber Piston With Low Friction Applied in Cars Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness 57 - 61 density 2.15 – 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3 ...
Car Front Shocks Good Seal Ptfe Banded Piston
Good Seal PTFE Banded Piston for Car Front Shocks With Different Dimensions Specifications: Here is the physical properties of our products Tensile strength ≥18N/mm2 Carrying capacity ≥15N/mm3 Working temperature -80°C to 260°C Friction coefficient(dry) ≤0.16 Friction coefficient(oil) ≤0.05 Physical ...
32mm PTFE banded Shock Piston with hardness 60 for car / motorbike shocks
32mm PTFE banded Shock Piston with hardness 60 for car / motorbike shocks Specifications: • 4 round and square holes • conventional shock piston • net weight is 35.29g • we can do drawing load test for banded piston without band slippage after test. Physical performance for shock piston tensile ...
Good seal 20mm shock absorber car parts Piston with PTFE banding
Good seal 20mm shock absorber car parts Piston with PTFE banding Specifications: Physical performance for shock pistons tensile strength More than 15MPa elongation @ break More than 200% shore hardness (bands) 57 - 61 density 2.15 – 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3 ...
Low Friction PTFE Banded Shock Absorber Piston With Good Seal For Front Car Shocks
Low Friction PTFE Banded Shock Absorber Piston With Good Seal For Front Car Shocks Specifications: banded piston OD 29.84-29.91 single lip OD 30.13-30.33 skirt height 9.5-10.3 conventional design with PTFE banded on OD we can produce according to the customer's drawing material of sinter piston: FC...
Large Steel Ring HRB110 Shock Absorber Piston
HRB 70 - 110 Large Shock Piston With Steel Ring Band On OD Applied In Truck Shocks damping piston, piston, base valve, pistion rod guide are our mainly exported products. We are one of the Designer, Manufacturer for Powder Metallurgy parts of following Items. 1.) Types of Pistons, Foot Valves, Rod ...
Density 6.4g / cm3 Powder Metallurgy Pistons Used In Motorcycle Rear Shocks
Density 6.4g / cm3 Powder Metallurgy Pistons Used In Motorcycle Rear Shocks Specifications: Material iron powder metallurgy Density 6.2-6.8g/cm3 Hardness HRB60-80 Equipment auto mechanical Press, hydraulic press, automatic skirting machine Sintering Six sinter furnaces, including one harden Sinter ...
PTFE No Burrs Hardness 60 Shock Absorber Piston
New Design PTFE Banded With No Burrs Shock Absorber Piston Of Shore D Hardness 60 Specifications: • multihole design • can do slide resistance test according to the customer's demand • piston should slide down uniformity both in positive and contrary direction, no damping stagnation • test velocity ...
IATF16949 Certificate 2.2g/Cm3 Shock Absorber Parts
IATF16949 certificate 25mm motorbike shock absorber piston with density 2.2g/cm3 Specifications: • many round oil holes design • conventional shock piston • net weight is 30.3g • we can do drawing load test for banded piston without band slippage after test. Physical performance for shock piston ...
