"ptfe piston rings"

F50 - U3 - 66 customized car shock Banded Piston with flared design density 6.5 g / cm3 Product Name: Sintered shock absorber piston Material: (MPIF 35) FC-0205 (DIN 30910-4) Sint C10, Fe, Balance, Cu 1.5-3.9%, C 0.3-0.6% Density: 6.4-6.9 g/cm3 after steam oxidation Hardness: 55-90 HRB, loading 1 kN, diameter of ball 1/16" Surface Treatment: Steam oxidation, 2 hours, Fe3O4: 0.004-0.005mm, degree of oxidation 2-4% Unspecified Tolerance: ISO 2768 - m / H14, h14, +- IT14/2

35mm advanced PTFE Banded Shock Absorber Piston Of Good seal and proper hardness for trucks Specifications: Size: D35*D10*12 Lip OD and bottom OD design Advanced PTFE and filler as banding material Can produce according to customer's design pistons with excellent properties: Density : 2.16g/cm3 Hardness : 60.5HRB Tensile strength : 20.2 Mpa Elangation @ break : 304% Why choose XIAYI? 1. TS 16949 certificated 2. Technical team to design and produce banding machine 3. Produce

30mm Oil Flow Design Shock Absorber Piston With Elongation @ Break 100% Used in Cars Specifications: Physical performance for shock piston tensile strength More than 18MPa elongation @ break More than 160% shore hardness (bands) 57 - 61 density 2.06 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.2 hardness (sinter piston) HRB60-80 Technical requirements for sinter piston Raw material F50 - U3 - 66 or FC - 0208 With steam treatment OD tested by digital air

PTFE Banded Piston With Various Diameters Used In Front And Rear Shock Absorbers Specifications: Physical performance for shock piston tensile strength More than 18MPa elongation @ break More than 160% shore hardness (bands) 57 - 61 density 2.06 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.2 hardness (sinter piston) HRB60-80 Technical requirements for sinter piston Raw material F50 - U3 - 66 or FC - 0208 Steam treatment OD tested by digital air gauge

Customized PTFE band piston 375 Sintering Temp for car rear shocks Specifications: Physical performance for shock piston tensile strength More than 18MPa elongation @ break More than 160% shore hardness (bands) 57 - 61 density 2.06 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.2 hardness (sinter piston) HRB60-80 Technical requirements for sinter piston Raw material F50 - U3 - 66 or FC - 0208 Steam treatment OD tested by digital air gauge Description: Xia

Product Description: Designed with a surface finish of Steam Treatment, this piston ensures smooth and efficient operation within your shock absorber. The steam treatment not only enhances the surface quality but also improves the overall wear resistance, ensuring a long service life for your damper pistons. The material used for this exceptional piston is PTFE, known for its outstanding properties such as low friction, high strength, and excellent chemical resistance. This

40mm height density 6.5 band PTFE disc Piston without any defect after durability test Specifications: high shock absorber piston new design with PTFE banded on OD we can produce according to the customer's drawing middle part(sinter part), we can use the material as the customer's demand Physical performance for shock piston tensile strength More than 18MPa elongation @ break More than 160% shore hardness (bands) 57 - 61 density 2.06 2.19 g/cm3 wear Less than

Steam treatment for sinter piston and PTFE bands shock piston with good seals Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness 57 - 61 density 2.06 2.19 g/cm3 wear Less than 50mg friction coefficient Less than 0.3 highest working temperature 260 Description: Customized D36 cars 6 round & square holes design Shock Absorber Piston We are a professional factory engaging in producing

25mm PTFE banded Shock Absorber Piston of good tensile strength for automotive Why choose XIAYI? 1. TS 16949 certificated 2. Technical team to design and produce banding machine 3. Produce PTFE ring disc in XIA YI company, can assure the properties and quality for the ring disc. 4. With more than 10 years experience 5. A whole complete sets of testing equipment for shock absorber pistons Specifications: Physical performance for shock piston tensile strength More than 18MPa