"piston band"

Improved PTFE banded shock absorber piston of HRB 57-61 with tensile strength 23.5 MPA Production capability 1. Auto Mechanical Press: 50T, 100T, 140T 2. Hydraulic Press: 100T, 315T, 600T, 800T 3. Six sinter furnaces, including one harden Sinter Furnace 4. Heat treatment: Carbonitriding quenching and high frequency quenching 5. Ultrasonic clearing and auto deburring 6. In-house tooling making: EDM, wire cutting machine 7. Strength in machining: Machine center, CNC milling,

Inclined fluid holes for banded pistons 32mm with filled PTFE banding for shocks Solid piston with inclined holes SIZE 32mm * 8mm * 12.5mm Material for filler: Carbon graphite Can test drawing force for banding piston Xiayi design and produce automatic banding machine and test machine Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness 57 - 61 density 2.06 2.19 g/cm3 wear Less than 50mg

46 mm PTFE Banded Piston With HRB65 - 90 No Burrs Used In Car Shock Absorbers Groovefill requirement for banded piston The minimum groovefill requirement is valid for the average measurement / groove on both sides of the piston (0 and 180 on the circumference of the piston) BORE SIZE GROOVE FILL 27 MM MIN 0,24 MM 30 MM MIN 0,24 MM 32 MM MIN 0,30 MM 35 MM MIN 0,34 MM Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break

PTFE Banded Shock Absorber Pistons With Good Wear Resistance And Friction Xia Yi is specializing in producing damper pistons. Our products are not only selling well in many cities in China, but also exported to many overseas countries and regions, such as Africa, South America, Southeast Asia and the Middle East. Our enterprise is trying our best to provide higher quality products at lower price, and bring you satisfactory customer service. We always optimize our products to

Good seals sinter PTFE bands Shock Absorber Piston with steam treatment and low friction Specifications: Material Available for sinter piston: P/M Copper and Copper Alloys P/M Iron and Carbon Steel Iron And Carbon Steel Iron-Copper And Copper Steel Iron-Nickel And Nickel Steel Low Alloy Steel Commix Low Alloy Steel Sinter Hardened Steel Physical performance for shock piston tensile strength More than 15MPa elongation @ break More than 200% shore hardness 57 - 61 density 2.06

Carbon Fiber As Filler Ptfe Banded Piston With Density 2.18 , Car Shock Absorber Parts XIAYI company has both automatic and manual machine. For mass production order, we will choose automatic machine, can reach about 4000 ~ 5000 pcs per shift per one machine. For samples and orders with small quantity, we will still use manual machine because we need to change the toolings very often and will waste time. But banded pistons from both automatic and manual machine, all have good

F50 - U3 - 66 customized car shock Banded Piston with flared design density 6.5 g / cm3 Product Name: Sintered shock absorber piston Material: (MPIF 35) FC-0205 (DIN 30910-4) Sint C10, Fe, Balance, Cu 1.5-3.9%, C 0.3-0.6% Density: 6.4-6.9 g/cm3 after steam oxidation Hardness: 55-90 HRB, loading 1 kN, diameter of ball 1/16" Surface Treatment: Steam oxidation, 2 hours, Fe3O4: 0.004-0.005mm, degree of oxidation 2-4% Unspecified Tolerance: ISO 2768 - m / H14, h14, +- IT14/2

Blow - off testing Custom Shock absorber Piston with stand one million cycles fatigue test Description: No scuffing anc scratch Shock absorber Pistons SIZE: D25XD8X11.5 Square oil holes design Flared OD: 25.05-25.25mm, banded OD: 24.945-24.995mm Banded height: 9.75-10.25mm With PTFE banded on OD We can produce according to the customer's drawing Middle part (sinter part), we can use the material as the customer's demand Carbon content is 0.1%, copper content is

25mm PTFE banded shock piston with HRB70 - 90, density > 6.5g/cm3 with ID 7.1mm Piston export to Europe market with good quality pistons are produced by automatic banding machine 100% tested by air gauge with consistent size and coaxiality Groovefill requirement for banded piston The minimum groovefill requirement is valid for the average measurement / groove on both sides of the piston (0 and 180 on the circumference of the piston) BORE SIZE GROOVE FILL 27 MM MIN 0,24 MM